Metal side plate

1Remove all covers, the LIU board, the RFI shield, and the formatter board.

2Remove the two (2) screws (callout 1) from the grounding plate and lift the grounding plate from the product.

3Remove the three (3) grounding screws (callout 2).

Note

Upon reinstallation, make sure that you reinstall the grounding wires to

 

their correct locations.

 

4

Release the cable guide from the frame (callout 3).

 

 

5

Remove the remaining two (2) screws (callout 4) from the metal

 

 

side plate.

1

2

4

3

Figure 38. Metal side plate removal

6Remove the metal side plate by popping the latch on top, near the back, and lifting it away.

110 Removal and replacement

EN

Page 112
Image 112
HP 3150 manual Metal side plate removal