HP 3150 manual Softswitches, To change the country code softswitch

Softswitches

Any time the RFI shield is removed from the product, or when softswitches are reset to defaults, the country code softswitch must be reset.

Extended service mode allows you to change softswitches on the product. A softswitch is a set of one to eight bits (a sequence of eight 1's and 0's), as needed. See the software technical reference for a complete list of softswitches.

To change the country code softswitch

1Enter Backspace#** to access the extended service menu.

2Press < or > until Memory/Softswitches appears below Service on the control panel.

3Press the Enter/Menu.

4If Softswitches does not appear below Memory/Softswitches on the control panel, press < or > until it appears.

5Press Enter/Menu.

6Use the keypad to enter 101 (the “country code” softswitch).

7Press Enter/Menu.

EN Softswitches 197