HP 3150 manual Transfer roller guide and transfer roller

Transfer roller guide and transfer roller

1Remove all covers, the RFI shield, the printer door, the LIU board, the formatter board, the metal side plate, the paper pickup gear, the pickup roller assembly, and the paper feed frame.

2Looking at the back of the printer, note the two small, hook- shaped release tabs on each end of the transfer roller guide. Using the small flatblade screwdriver, carefully pry each tab outward to release it.

3Roll the released portion of the guide up. To remove the transfer roller guide, pull it off each end of the transfer roller shaft. This exposes the transfer roller.

Figure 60. Transfer roller guide and transfer roller removal

CAUTION Do not touch the transfer roller or otherwise allow it to be contaminated.

4Working from the front of the printer, gently pry the gear side of the transfer roller out first, then slide the other side out of its socket.

132 Removal and replacement EN