HP 3150 manual Operating environment, Environmental requirements Category Requirement

Operating environment

The environmental requirements listed below must be maintained to ensure the proper operation of the HP LaserJet 3100/3150 product.

Table 7. Environmental requirements

Category	Requirement
Operating (working or	Temperature: 59 to 90.5 degrees Fahrenheit
standby)	(15 to 32.5 degrees Celsius)
	Humidity: 10 to 80 percent relative humidity (no condensation)
Non-operating	Temperature (toner cartridge): -4 to 104°F (-20 to 40°C);
	Temperature (product): -4 to 140°F (-20 to 60°C)
	Humidity: 10 to 90 percent relative humidity (no condensation)
Normal storage	Temperature: 32 to 95°F (0 to 35°C)
	Humidity: 35 to 85 percent relative humidity

Consider the following before installing the printer:

●Install in a well-ventilated, dust-free area.

●Install on a hard, flat, continuous surface, with all four feet level. Do not install on carpet or other soft surfaces.

●Ensure adequate power is supplied.

Note	Uninterruptible power supplies (UPS) may be used with the
	HP LaserJet 3100/3150 product.
	● Install away from direct sunlight, open flames, or ammonia fumes.

If the HP LaserJet 3100/3150 product is placed near a window, make sure the window has a curtain or blind to block direct sunlight.

● Install with enough space around the product for proper access and ventilation.

● Install away from the direct flow of exhaust from air ventilation systems.

36 Installation and operation EN