"R" is the variable's name,"?" is the prompt for information, and0.0000 is the current value stored in the variable.

Press f(run/stop) to resume the program. The value you keyed in then writes over the contents of the X–register and is stored in the given variable. If you have not changed the displayed value, then that value is retained in the X–register.

The area–of–a–circle program with an INPUT instruction looks like this:    "!   º  π  º  !To use the INPUT function in a program:1.Decide which data values you will need, and assign them names.

(In the area–of–a–circle example, the only input needed is the radius, which we can assign to R.)

2.In the beginning of the program, insert an INPUT instruction for each variable whose value you will need. Later in the program, when you write the part of the calculation that needs a given value, insert a Kvariable instruction to bring that value back into the stack.

Since the INPUT instruction also leaves the value you just entered in the X–register, you don't have to recall the variable at a later time — you could INPUT it and use it when you need it. You might be able to save some memory space this way. However, in a long program it is simpler to just input all your data up front, and then recall individual variables as you need them.

Remember also that the user of the program can do calculations while the program is stopped, waiting for input. This can alter the contents of the stack, which might affect the next calculation to be done by the program.

12–12 Simple Programming

File name 32sii-Manual-E-0424

 

Printed Date : 2003/4/24

Size : 17.7 x 25.2 cm