Changing the Batteries

Replace the batteries as soon as possible when the low battery annunciator ( ¤) appears. If the battery annunciator is on, and the display dims, you may lose data. If data is lost, the &  message is displayed.

Once you've removed the batteries, replace them within 2 minutes to avoid losing stored information. (Have the new batteries readily at hand before you open the battery compartment.) Use any brand of fresh I.E.C LR44 (or manufacturer's equivalent) button–cell batteries.

Equivalent 1.5–volt, button–cell batteries you might find from various manufacturers are LR44, A76, V13GA, KA76, 357, SP357, V357, and SR44W.

1.Have three fresh button–cell batteries at hand. Avoid touching the battery terminals — handle batteries only by their edges.

2.Make sure the calculator is OFF. Do not press ON ( †) again until the entire battery–changing procedure is completed. If the calculator is ON when the batteries are removed, the contents of Continuous Memory will be erased.

3.Remove the battery–compartment door by pressing down and outward on it until the door slides off (left illustration).

A- 3 picture

4.Turn the calculator over and shake the batteries out.

Warning

Do not

mutilate,

puncture, or dispose

of

 

batteries

in fire.

The batteries can burst

or

explode, releasing hazardous chemicals.

5.Insert the new batteries (right illustration). Stack them according to the diagram inside the battery compartment.

6.Replace the battery–compartment door (slide the tab on the door back into the slot in the calculator case).

Support, Batteries, and Service A–3

File name 32sii-Manual-E-0424

 

Printed Date : 2003/4/24

Size : 17.7 x 25.2 cm