Example:

Keys:

14*

HA A

††

Display:Description:

... +Calculates e14.

 )  Shows all decimal digits.



+Stores value in A.

...

 

 

/...

+Views A.



Clears x.

Changing the Fraction Display

In its default condition, the calculator displays a fractional number according to certain rules. (See "Display Rules" earlier in this chapter.) However, you can change the rules according to how you want fractions displayed:

You can set the maximum denominator that's used.

You can select one of three fraction formats.

The next few topics show how to change the fraction display.

Setting the Maximum Denominator

For any fraction, the denominator is selected based on a value stored in the calculator. If you think of fractions as a b/c, then /c corresponds to the value that controls the denominator.

The /c value defines only the maximum denominator used in Fraction–display mode — the specific denominator that's used is determined by the fraction format (discussed in the next topic).

To set the /c value, press n {‹, where n is the maximum denominator you want. n can't exceed 4095. This also turns on Fraction– display mode.

To recall the /c value to the X–register, press 1 .

To restore the default value or 4095, press 0 . (You also restore

Fractions 5–5

File name 32sii-Manual-E-0424

 

Printed Date : 2003/4/24

Size : 17.7 x 25.2 cm