The e((D−M)⎟S)2 ⎟2 function is calculated by the routine labeled F. Other routines prompt for the known values and do the other calculations to find Q(D), the upper–tail area of a normal curve. The integration itself is set up and executed from routine Q:

        %  /   ∫  G 

Recalls lower limit of integration.

Recalls upper limit of integration. (X = D.)

Specifies the function.

Integrates the normal function using the dummy variable

D.

Restrictions o Solving and Integrating

The SOLVE variable and ∫ FN d variable instructions cannot call a routine that contains another SOLVE or ∫ FN instruction. That is, neither of these instructions can be used recursively. For example, attempting to calculate a multiple integral will result in an ∫1∫2 error. Also, SOLVE and ∫ FN cannot call a routine that contains an /label instruction; if attempted, a # !# or ∫ !# error will be returned. SOLVE cannot call a routine that contains an ∫FN instruction (produces a #1∫2 error), just as ∫ FN cannot call a routine that contains a SOLVE instruction (produces an ∫1 #2 error).

The SOLVE variable and ∫FN d variable instructions in a program use one of the seven pending subroutine returns in the calculator. (Refer to "Nested Subroutines" in chapter 13.)

The SOLVE and ∫FN operations automatically set Decimal display format.

14–10 Solving and Integrating Programs

File name 32sii-Manual-E-0424

 

Printed Date : 2003/4/24

Size : 17.7 x 25.2 cm