HP 4500 - G510a manual

If you want to configure this setting…		…do this:
Distinctive Ring		1.	Press the	or	buttons to select
Change the answer ring pattern for			Fax Settings, and then press OK.
distinctive ring		2.	Select Ring Pattern or Distinct Ring.
	Note: If you are using a distinctive
		3.	Select the setting that matches the
	ring service, you can use more than
			pattern that the telephone company
	one telephone number on the same
			assigned to your fax number, and then
	telephone line. You can change
			press OK.
	this setting to enable the printer to
	determine automatically which ring
	pattern it should use for fax calls only.
Fax Speed		1.	Press the	or	buttons to select
Set the fax speed used to communicate			Fax Settings, and then press OK.
between the printer and other fax machines		2.	Select Fax Speed.
when sending and receiving faxes.		3.	Select the desired fax speed, and then
	Note: If you experience problems
			press OK.
	sending and receiving faxes, try using
	a lower fax speed.
Fax Error Correction Mode		1.	Press the	or	buttons to select
If the printer detects an error signal during			Fax Settings, and then press OK.
the transmission and the error-correction		2.	Select Error Correction, and then
setting is turned on, the printer can request
			press OK.
that a portion of the fax be resent.
		3.	Select On or Off.
	Note: If you have problems sending
	and receiving faxes, turn off error
	correction. Also, turning off this setting
	might be useful when you are trying to
	send a fax to another country/region
	or receive a fax from another country/
	region or if you are using a satellite
	phone connection.
Volume		1.	Press the	or	buttons to select
Change the volume of the printer sounds,			Basic Settings, and then press OK.
including the fax tones.		2.	Select Speaker Volume.
		3.	Select the desired volume, and then
			press OK.

12 Fax