HP 6500 - E709a Set the junk fax mode, To set the junk fax mode, Add numbers to the junk fax list

Set the junk fax mode

By default, Block Junk Fax mode is turned On. If you do not subscribe to a caller ID service through your phone provider, or do not want to use this feature, you can turn off this setting.

To set the junk fax mode

▲Press the Junk Fax Blocker button, select the Block Junk Fax option, and then select On or Off.

Add numbers to the junk fax list

There are two ways to add a number to your junk list. You can select numbers from your caller ID history, or you can enter new numbers. The fax from numbers in your junk list are blocked if Block Junk Fax mode is set to On.

To select a number from the caller ID list

1.Press Setup.

2.Select Basic Fax Setup, and then select Junk Fax Blocker Setup.

3.Select Add number to Junk List, and then select Select Number.

4.Press the right arrow button to scroll through the numbers from which you have received faxes. When the number you want to block appears, press OK to select it.

5.When the Select Another? prompt appears, do one of the following:

•If you want to add another number to the list of junk fax numbers, press Yes, and then repeat step 4 for each number you want to block.

•If you are done, press No.

To manually enter a number to block

1.Press Setup.

2.Select Basic Fax Setup, and then select Junk Fax Blocker Setup.

3.Select Add number to Junk List, and then select Enter Number.

4.Use the keypad to enter a fax number to block, and then press OK.

Make sure you enter the fax number as it appears on the control-panel display, and not the fax number that appears on the fax header of the received fax, as these numbers can be different.

5.When the Enter Another? prompt appears, do one of the following:

•If you want to add another number to the list of junk fax numbers, press Yes, and then repeat step 4 for each number you want to block.

•If you are done, press No.

Receive a fax 67