HP ProCurve 6600 Port, Port Disabled, Port Connected, Fault-Disabled, Port Not Connected, Figure 5-12.The Port Status Indicators and Legend, Port Status

Using the ProCurve Web Browser Interface

Status Reporting Features

Figure 5-11. Display of Numerical Values for the BarPort Status

Port Status Indicators Legend

Figure 5-12. The Port Status Indicators and Legend

The Port Status indicators show a symbol for each port that indicates the general status of the port. There are four possible statuses:

■Port Connected – the port is enabled and is properly connected to an active network device.

■Port Not Connected – the port is enabled but is not connected to an active network device. A cable may not be connected to the port, or the device at the other end may be powered off or inoperable, or the cable or connected device could be faulty.

■Port Disabled – the port has been configured as disabled through the web browser interface, the switch console, or SNMP network manage­ ment.

■Port Fault-Disabled– a fault condition has occurred on the port that has caused it to be auto-disabled. Note that the Port Fault-Disabled symbol will be displayed in the legend only if one or more of the ports is in that status. See Appendix B, “Monitoring and Analyzing Switch Opera­ tion” for more information.

5-20