Power-Saving Features

duration <[HH:]MM>: The amount of time the LEDs remain turned off. Optional. If the duration value is zero, when the timer starts the LEDs are turned off indefinitely until the timer is canceled or the command is overridden with another command. Default: 0 (zero)

recur: Optional. If specified, the LEDs are turned off on a daily basis at the configured time. The recur option is ignored if the duration is configured as zero.

Default: disabled.

If the configured time is less than two minutes from the current time, the LEDs will be turned off instantly, however, the start time of the timer is shown as two minutes from the current time.

A new command overrides the previous command, regardless of the current state. For example, if a timer is active and new command is given, the currently running timer is canceled and the new timer is scheduled.

The no form of the savepower led command cancels any scheduled or running timer and the LEDs are returned to their original state. The all option can be specified with the no command to turn on all the switch LEDs.

ProCurve(config)# savepower led timer 06/01/2009 12:01 duration 12:00 recur

ProCurve(config)# show savepower led

Led Save Power Information

Alarm

Start Time

: 06/01/09 12:01:07

Alarm Duration

(HH:MM)

: 12:00

Recurrent Status

: Enabled

Led Save Power

Information

Slot Status

 

 

----+ --------

A Disabled B Disabled C Disabled D Disabled E Disabled

Figure I-2. Example of Setting a Time and Duration for savepower led Command

I-5