Configuring IP Addressing

Configuring a Single Source IP Address

ProCurve(config)# show radius

Status and Counters - General RADIUS Information

Deadtime(min) : 0

Timeout(secs) : 5

Retransmit Attempts : 3

Global Encryption Key :

Dynamic Authorization UDP Port : 3799

Source IP Selection : Configured IP address

Source IP Selection for the specified application protocol is displayed.

Figure 8-20. Example of show radius Command Displaying Source IP Selection Information

ProCurve(config)# show tacacs

Status and Counters - TACACS Information

Timeout : 5

Source IP Selection : Configured IP Interface

Encryption Key :

Source IP Selection for the specified application protocol is displayed.

Figure 8-21. Example of show tacacs Command Displaying Source IP Selection Information

ProCurve(config)# show debug

Debug Logging

Source IP Selection: Configured IP interface

Destination: None

Enabled debug types:

None are enabled.

Source IP Selection for the specified application protocol is displayed.

Figure 8-22. Example of show debug Command Displaying Source IP Selection Information for Syslog

8-31