Configuring IP Addressing

IP Configuration

Figure 8-5. Example of Multinetting on the Default VLAN

N o t e

The Internet (IP) Service screen in the Menu interface (figure 8-1on page 8-6)

 

displays the first IP address for each VLAN. You must use the CLI show ip

 

command to display the full IP address listing for multinetted VLANs.

 

Removing or Replacing IP Addresses in a Multinetted VLAN. To

 

 

remove an IP address from a multinetted VLAN, use the no form of the IP

 

address command shown on page 8-9.Generally, to replace one IP address

 

with another, you should first remove the address you want to replace, and

 

then enter the new address.

 

Configure the Optional Default Gateway. Using the Global configura­

 

tion level, you can manually assign one default gateway to the switch. (The

 

switch does not allow IP addressing received from a DHCP or Bootp server

 

to replace a manually configured default gateway.)

 

Syntax: ip default-gateway < ip-address >

 

For example:

 

ProCurve(config)# ip default-gateway 10.28.227.115

8-10