Interface Access and System Information

System Information

Figure 7-11. System Location and System Contact in the Web Browser

Reconfigure the MAC Age Time for Learned MAC Addresses. This command corresponds to the MAC Age Interval in the menu interface, and is expressed in seconds.

Syntax: mac-age-time < 10 - 1000000 > (seconds)

Allows you to set the MAC address table’s age-outinterval. An address is aged out if the switch does not receive traffic from that MAC address for the age-outinterval, measured in seconds. Default: 300 seconds.

For example, to configure the age time to seven minutes:

ProCurve(config)# mac-age-time 420

Configure the Time Zone and Daylight Time Rule. These commands:

■Set the time zone you want to use

■Define the daylight time rule for keeping the correct time when daylight- saving-time shifts occur.

Syntax: time timezone < -720 - 840 >

time daylight-time-rule < none alaska continental-us-and-canada middle-europe-and-portugal southern-hemisphere western-europe user-defined>

East of the 0 meridian, the sign is “+”. West of the 0 meridian, the sign is “-”.

7-17