HP ProCurve 6600 Figure 7-5.Example of Executing a Series of Console Commands, Figure 7-4.Example of Executing the Console Command with Multiple Parameters

Interface Access and System Information

Interface Access: Console/Serial Link, Web, and Inbound Telnet

		The switch implements the Event Log change immediately. The switch implements
		the other console changes after executing write memory and reload.
Figure 7-4. Example of Executing the Console Command with Multiple Parameters
N o t e	When using redundant management, console settings, such as mode, flow-
	control and baud-rate, are the same on both management modules. There
	cannot be individual settings for each management module.
	You can also execute a series of console commands and then save the
	configuration and boot the switch. For example:
Configure
the
individual
parameters.
Save the
changes.
Boot the
switch.

Figure 7-5. Example of Executing a Series of Console Commands

7-10