HP ProCurve 6600 Configuring a Broadcast Limit on the Switch, Figure 10-13.Example Continued from Figure, Figure 10-14.Example Continued from Figure, ProCurve(config)#int B1

Port Status and Configuration

Viewing Port Status and Configuring Port Parameters

Disables per-port flow control on ports A5 and A6.

Figure 10-13. Example Continued from Figure 10-12

Disables per-port flow control on ports A1 through A4 . Flow control is now disabled on the switch.

Ports formerly configured for flow control.

Figure 10-14. Example Continued from Figure 10-13Configuring a Broadcast Limit on the Switch

Broadcast-Limit on switches covered in this guide is configured on a per-port basis. You must be at the port context level for this command to work, for example:

ProCurve(config)#int B1ProCurve(int B1)# broadcast-limit 1

10-20