HP ProCurve 6600 brief, Figure 11-5.Showing the PoE Information by Slot, Figure 11-4.Example of show power-over-ethernetbrief Command Output

Power Over Ethernet (PoE/PoE+) Operation

Displaying the Switch’s Global PoE Power Status

For example, show power-over-ethernet brief displays this output:

ProCurve(config)# show power-over-ethernet brief

Status and Counters - Port Power Status

System	Power Status		: No redundancy
PoE Power Status			: No redundancy
Available: 600 W		Used: 9 W		Remaining:			591	W
Module	A Power	Used: 9 W		Remaining:			399	W
Available: 408 W
PoE	Power	Power		Alloc	Alloc		Actual Configured		Detection	Power
Port	Enable	Priority		By	Power		Power Type		Status	Class
------	+ -------	---------		-----	------		------ -----------		-----------	------
A1	Yes	low		usage	17	W	0.0	W	Searching	0
A2	Yes	low		usage	17	W	0.0	W	Searching	0
A3	Yes	low		usage	17	W	0.0	W	Searching	0
A4	Yes	low		usage	17	W	0.0	W	Searching	0
A5	Yes	low		usage	17	W	0.0	W	Searching	0
A6	Yes	low		usage	17	W	8.4	W	Delivering	2
A7	Yes	low		usage	17	W	0.0	W	Searching	0
A8	Yes	low		usage	17	W	0.0	W	Searching	0
A9	Yes	low		usage	17	W	0.0	W	Searching	0

Figure 11-4. Example of show power-over-ethernet brief Command OutputYou can also show the PoE information by slot:

ProCurve(config)# show power-over-ethernet slot A

Status and Counters - System Power Status for slot A

Maximum Power	:	408	W	Operational Status :	On
Power In Use	:	9	W +/- 6 W	Usage Threshold (%) :	80

Figure 11-5. Showing the PoE Information by Slot

11-22