HP ProCurve 6600 Disabled, Configuration, Figure 13-9.Example of Listing the Guaranteed Minimum Bandwidth, Configuration, Displaying the Current Guaranteed Minimum Bandwidth

Port Traffic Controls

Guaranteed Minimum Bandwidth (GMB)

Either of the following commands configures ports A1 through A5 with bandwidth settings:

ProCurve(config)#int a1-a5 bandwidth-min output 2 3 30 10 10 10 15 20

ProCurve(eth-A1-A5)#bandwidth-min output 2 3 30 10 10 10 15 20

Displaying the Current Guaranteed Minimum BandwidthConfiguration

This command displays the per-port GMB configuration in the running-config file.

Syntax: show bandwidth output [ port-list]

Without [ port-list ], this command lists the GMB configuration for all ports on the switch. With [ port-list], this command lists the GMB configuration for the specified ports. This command operates the same way in any CLI context. If the command lists Disabled for a port, there are no bandwidth minimums configured for any queue on the port. (Refer to the description of the no form of the bandwidth-min output command on page 13-25.)

For example, to display the GMB configuration resulting from either of the above commands:

ProCurve(config)# show bandwidth output a1-a5

Outbound Guaranteed Minimum Bandwidth %

Port	Q1	Q2	Q3	Q4	Q5	Q6	Q7	Q8
----	--	--	--	--	--	--	--	--
A1	2	3	30	10	10	10	15	20
									User-Configured
A2	2	3	30	10	10	10	15	20	Minimum
A3	2	3	30	10	10	10	15	20	Bandwidth
A4	2	3	30	10	10	10	15	20	Settings
A5	2	3	30	10	10	10	15	20

Figure 13-9. Example of Listing the Guaranteed Minimum Bandwidth

Configuration

13-28