Switch Licensing

The procedure for installing a licensed feature into a switch is:

1.Locate the registration ID. When you purchase a software license, you receive a folded license registration card. The registration ID is located on the inside of the card, in the upper left corner.

2.Get the switch’s hardware ID. Establish a console connection to the switch CLI and enter Manager level, using the enable command if neces­ sary and the switch password if required. For example:

ProCurve> enable ProCurve#

From the Manager level, issue the licenses hardware-id <license_type> command. For example:

ProCurve# licenses hardware-id premium

The CLI returns a hardware ID number. Copy the hardware ID number from the screen (using Ctrl-C) or write it down. (Copying the number is easier and more accurate.) You will enter the number on the My ProCurve portal in the next step.

3.Get the license key. Point your Web browser at the My ProCurve portal (http://my.procurve.com) and sign in. Click the My Licenses tab (formerly My Software), follow the links for licensing device software, and follow the instructions for entering the registration ID and the hardware ID. At the end of the procedure a license key is displayed. (It is also e-mailed to you.) Copy the license key from the screen (using Ctrl-C) or write it down.

4.Enter the license key into the switch. On the CLI console, save the configuration of the switch (write memory). Then, from a Manager-level prompt, issue a licenses install premium <license-key> command. (The license key number is not case sensitive.) For example:

ProCurve# licenses install premium AA000GG000-A- 0123ABC-ABCD123-0A2B3C4-0123ABC

5.Reboot the switch. For example:ProCurve# boot or:ProCurve# reloadThe licensed features should now be active on the switch.
H-2