HP A5799A manual Field, Function

7(50,1$/6(59(55()(5(1&(

Field

Restore Factory Defaults?

--Network Initialization

Parameters--Start Network

on Power-up?

IP Address (nnn.nnn.nnn.nnn)

PPPAddress

(nnn.nnn.nnn.nnn)

Subnet Mask (nnn.nnn.nnn.nnn)

Function

Initially No appears on the screen. Press the space bar to toggle to Yes. Select Yes to reload the values set at the factory.

Initially No appears on the screen. Press the space bar to toggle to Yes. Yes will start the network module on unit power-up using the parameters defined with the SNP command.

Enter the IP address of the terminal server. Each device on the network must have its own unique IP address. The IP address assigned to the terminal server at the factory may not be appropriate for your network.

The IP address must be set before the network module of the terminal server is started. Once the network has been started, changes to this parameter will take effect only after the terminal server is power-cycled (rebooted).

Enter the PPP address of the terminal server. This is the IP address that is used to identify the terminal server over a PPP link. The network portion of the PPP address must be different from the IP address used above.

The subnet mask determines which part of the terminal server's IP address represents its network number and which part represents its node number. Obtain an appropriate value from your network administrator.

41