&+$37(5$&7,21$1'(9(175287,1(
.POWERUP
The .POWERUP event occurs automatically whenever the Terminal server is powered up. This might indicate a new installation, recovery from a power loss, or that the unit was moved to a new location.
Example:
Alarm/Event | Action Routine | Parameters | Comments |
.POWERUP | PHONHOME |
|
|
This example causes the Terminal server to report to the maintenance center that the unit has been reset. If desired, someone can then investigate the reason for the .POWERUP event.
.PPPREQ
This event is triggered when a PPP link is needed to send an SNMP trap or to send a file via FTP. It is usually associated with the phone PPP (PHPPP) Action Routine.
Alarm/Event | Action Routine | Parameters | Comments |
.PPPREQ | PHPPP | 5551212 | Create the PPP |
|
|
| link. |
The telephone number can be specified directly, or any of the default telephone numbers specified in the system parameters can be referenced. PHPPP assumes that there is no firewall or security on the remote access device. If this is not the case, contact your Hewlett- Packard Service Representative.
132
