HP A5799A manual Manual Buffering, Clbuf

&+$37(5￿￿),/(%8))(5,1*

Field

Auto Switch (enter 0 to disable) When CURRENT File exceeds ‘n’ KB

Every n hours

Synchronize at what hour (0-23)

Function

it is dependent on the data.

Enter the file size (in KB) at which the buffer should be switched. Note that the CURRENT.x file is renamed using the convention described in this section.

Enter 0 to disable this feature.

Enter the number of hours between the switching of buffers.

Indicate the hour at which the buffer should be switched. If the value is set to 2 and the previous value is set to 8, the buffer will switch at 200, 1000, and 1200 hours.

NOTE: If both the Current File exceeds ‘n’ KB and the Every n hours parameters are set, the buffer is switched when the first condition is met.

Manual Buffering

Buffers can be opened, closed and switched manually by the Administrator. To do this, use the buffer commands listed in the File Management Menu.

Command	Function
OPBUF	Open buffer
	Opens a buffer for a port. You will be prompted
	for the port number.
CLBUF	Close buffer
	Closes the buffer file for a particular port. You will
	be prompted for the port number.

68