HP A5799A manual Char. Length/Parity, Terminal Emulation, Sysop Idle Timer

	7(50,1$/6(59(55()(5(1&(
Field	Function
	CONNECT n is chosen, and no CONNECT
	message is sent to the terminal server
	modem, it reverts to Auto Baud.
	Press the space bar until the desired choice
	is displayed. When the speed you want
	appears in the field, press the Enter key to
	select that speed. Speeds available are
	CONNECT n, 57600, 38400, 19200, 9600,
	4800, 2400, 1200, 300 and Auto.
Char. Length/Parity	Use the space bar to select the character
	length and parity characteristics of the
	Modem Port. Available entries are 7 or 8
	data bits, with Even, Odd, Mark, Space or no
	parity.
	The Auto entry initiates an auto-parity routine
	with the user.
Terminal Emulation	Specify the type of terminal that your
	computer is emulating when your computer
	is connected to the Modem Port via a remote
	modem.
	Press the space bar to toggle between TTY
	and VT100.
	If your computer is emulating a DEC VT-100
	terminal, select VT100. If your computer is
	not emulating a DEC VT-100 terminal, select
	TTY. After you make your selection, press
	the Enter key.
	NOTE: Only Sysop sessions are affected.
Sysop Idle Timer	The Sysop idle timer defines the maximum
	duration of inactivity time during a Sysop
	session before the call is terminated and the
	modem is reset.

79