HP A5799A manual Using FTP to Receive Files from Another Device, Sebuf

&+$37(5￿￿),/(%8))(5,1*

SEBUF

<host#>,F,<IPaddr>,<user>,<password>,[directory]

Where:
<host#>	= is the number of the host port on the
	terminal server
F	= use ftp protocol.
<IP addr>	= IP address of the server that will receive
	the file.
<user>	= login name of the ftp user on the server.
<password>	= password of the ftp user on the server.
[directory]	= directory on the server into which the file
	will be transferred. Enter the directory or
	specify “.” to use the default ftp directory.

Examples:

To send all buffer files from Host port 1 using server profile 2 and the FTP protocol, enter:

SEBUF 1,F,2

To send all buffer files from Host port 3 to a server at address 193.1.1.241 with the username and password of ftpuser, to the directory recdir enter:

SEBUF 3,F,193.1.1.241,ftpuser,ftpuser,\recdir NOTE: Parameters are case-sensitive.

Using FTP to Receive Files from Another Device

The terminal server supports FTP Client Receive commands. Files can be sent from the FTP server to a terminal server using FTP (File Transfer Protocol) protocol. To do this, you must set parameters in the Set

72