&+$37(5),/(%8))(5,1*
Command: SEND
Syntax:SEND <filename>,F,<server #>
(Uses the IP address, user name and password for the specified server (1 or 2). These parameters have been stored in the FTP parameters screen.)
Files are sent from the current directory.
Examples:
To send the file NEW.CFG to server #1 (the default server entered using the SNP 3 command) from the directory TEST while in the current directory, the command format is:
SEND \TEST\NEW.CFG,F,1
Where: |
|
<TEST> | = name of the Host port Directory |
<NEW.CFG> | = name of file to send |
F | = use ftp protocol. |
<server#> | = Number of the server that will |
| receive the file, as listed in the |
| Network Parameters table. |
To send a file from the current directory, you need not enter a directory name:
SEND NEW.CFG,F,1
Files can also be sent to a server whose profile was not entered into the terminal server with the SNP 3 command. To do this enter the following information:
70
