|
|
|
|
| HSV Element Manager Event Codes |
|
|
|
|
|
|
Table 8: HSV Element Manager Event Codes: Controller Events (Continued) | |||||
|
|
|
|
|
|
Event | Event | Sev- | SWC | Evt. | Description |
ID | Code | erity | ID | No. | |
3509 | 88030db5 | 6 | d | b5 | Storage Cell: %1 Event Code: %2 Description: A drive enclosure power supply |
|
|
|
|
| current sensor out of range condition has been reported. This problem was |
|
|
|
|
| detected by the Drive Enclosure Environmental Monitoring Unit located in the |
|
|
|
|
| drive enclosure identified in the dencl_num field within the rack identified in the |
|
|
|
|
| rack_num field. The rack_num field will not be valid until a future release. The |
|
|
|
|
| location of the current sensor (1 through 4) is identified in the |
|
|
|
|
| alarm_error_code.field.en field as follows: 1 = Power Supply 1 +5 VDC 2 = |
|
|
|
|
| Power Supply 1 +12 VDC 3 = Power Supply 2 +5 VDC 4 = Power Supply 2 +12 |
|
|
|
|
| VDC The current sensor out of range condition is described by the content of the |
|
|
|
|
| alarm_error_code.field.ec field as follows: 1 = The element current is |
|
|
|
|
| approaching, but has not reached, the high current CRITICAL threshold. |
|
|
|
|
| Continued operation under these conditions may result in a CRITICAL condition. |
|
|
|
|
| 2 = The element current is above the high current CRITICAL threshold. |
|
|
|
|
|
|
3544 | 88030dd8 | 3 | d | d8 | Storage Cell: %1 Event Code: %2 Description: A drive enclosure backplane |
|
|
|
|
| invalid NVRAM read error has occurred. This problem was detected by the Drive |
|
|
|
|
| Enclosure Environmental Monitoring Unit located in the drive enclosure identified |
|
|
|
|
| in the dencl_num field within the rack identified in the rack_num field. The |
|
|
|
|
| rack_num field will not be valid until a future release. The |
|
|
|
|
| alarm_error_code.field.en field contains the value 1 signifying that the drive |
|
|
|
|
| enclosure is the affected element. |
|
|
|
|
|
|
3545 | 88030dd9 | 6 | d | d9 | Storage Cell: %1 Event Code: %2 Description: A drive enclosure backplane |
|
|
|
|
| error has occurred. This problem was detected by the Drive Enclosure |
|
|
|
|
| Environmental Monitoring Unit located in the drive enclosure identified in the |
|
|
|
|
| dencl_num field within the rack identified in the rack_num field. The rack_num |
|
|
|
|
| field will not be valid until a future release. The alarm_error_code.field.en field |
|
|
|
|
| contains the value 1 signifying that the drive enclosure is the affected element. |
|
|
|
|
| The cause of the improper operation is described by the content of the |
|
|
|
|
| alarm_error_code.field.ec field as follows: 11 = Unable to write data to the |
|
|
|
|
| NVRAM. This problem prevents communication between elements in the |
|
|
|
|
| enclosure. 12 = Unable to read data from the NVRAM. This problem prevents |
|
|
|
|
| communication between elements in the enclosure. 13 = NVRAM has not been |
|
|
|
|
| initialized properly. This is a manufacturing error. |
|
|
|
|
|
|
3549 | 88030ddd | 6 | d | dd | Storage Cell: %1 Event Code: %2 Description: A drive enclosure I/O module |
|
|
|
|
| error has occurred. This problem was detected by the Drive Enclosure |
|
|
|
|
| Environmental Monitoring Unit located in the drive enclosure identified in the |
|
|
|
|
| dencl_num field within the rack identified in the rack_num field. The rack_num |
|
|
|
|
| field will not be valid until a future release. The location of the I/O module (A |
|
|
|
|
| (01) and B (02)) is identified in the alarm_error_code.field.en field. The cause of |
|
|
|
|
| the improper operation is described by the content of the |
|
|
|
|
| alarm_error_code.field.ec field as follows: 1 = The I/O module’s Fibre Channel |
|
|
|
|
| link speed is not supported by the backplane. This error prevents the controller |
|
|
|
|
| from establishing a link with enclosure drives and eliminates the enclosure |
|
|
|
|
| |
|
|
|
|
| = Unable to read data from the I/O module NVRAM. |
|
|
|
|
|
|
3550 | 88030dde | 3 | d | de | Storage Cell: %1 Event Code: %2 Description: A drive enclosure I/O module is |
|
|
|
|
| unable to communicate with the Drive Enclosure Environmental Monitoring Unit. |
|
|
|
|
| This problem was detected by the Drive Enclosure Environmental Monitoring Unit |
|
|
|
|
| located in the drive enclosure identified in the dencl_num field within the rack |
|
|
|
|
| identified in the rack_num field. The rack_num field will not be valid until a future |
|
|
|
|
| release. The location of the I/O module (A (01) and B (02)) is identified in the |
|
|
|
|
| alarm_error_code.field.en field. |
|
|
|
|
|
|
Storage Management Appliance Software Event Code Definitions Application Notes | 51 |