To use OmniBook power modes, Standby Mode

Introduction

Power Management

To use OmniBook power modes

	Hint	Time-out settings . In order to save power, you can change time-outs to
		automatically enter different power states after a certain amount of inactivity.


	When you		The OmniBook enters	To exit this mode

	Press Fn+S		Standby Mode	Press any key. Any mouse or TouchPad
	or		Turns off the display only.	movement will also exit Standby
	allow time-out.		Maintains network connections.	mode.
			Restarts quickly (“Instant-On”).
	Press blue power button		Suspend Mode	Press the power button to resume.
	or		Turns off the display.
	close the lid		Saves significant power.
	or		Saves current session in RAM.
	click Start, Suspend		Restarts quickly (“Instant-On”).
	or		Loses network connections. *
	allow time-out.
	Press Fn+F12		Hibernate Mode	Press the power button to turn on and
	or		Saves to disk, then turns off.	restore the current session.
	allow time-out.		Saves maximum power.
			Saves current session on Disk.
	Click Start, Shut Down (recommended)		Off Mode	Press the power button to turn on and
	or		Saves maximum power.	reboot.
	Press blue power button longer than 4 seconds.		Resets everything at startup.
			Starts a new session.

	* Windows 95 can restore network connections when you turn on the OmniBook. For a different operating system, you may have to
	reboot the OmniBook or restart the operating system to restore them.

Note		If the ac adapter is connected, the OmniBook battery continues to charge in any
		mode.

1-8