HP BOOK 3000 manual Using Phoenix CardExecutive

Models: BOOK 3000

1 108
Download 108 pages 54.99 Kb
Page 79
Image 79

Using Windows NT 4.0

Installing Cards

10.Select the Protocols to install, then click Next.

11.Click Next to install the default Windows NT networking services.

12.Click Next to install the networking components.

13.Enter the directory of the Windows NT install files, then click Continue. (If you installed from CD-ROM they are in d:\I386\.)

14.Enter the directory of the Xircom Windows NT drivers (A:\), then click OK.

15.Enter the settings listed above in the Setup window, then click Continue.

16.If you installed the TCP/IP protocol you will be asked if you wish to use DHCP. Select the appropriate choice for your network.

17.If you chose not to use DHCP you will be prompted to enter your TCP/IP information.

18.Click Next to choose the default network bindings.

19.Click Next to start the network.

20.Select whether you are connecting to a workgroup or a domain and enter the appropriate name for your network, then click Next.

21.Click Finish, then click Yes to restart your computer.

Using Phoenix CardExecutive

Follow these steps if the Phoenix CardExecutive is installed.

1.Start Windows NT 4.0

2.Insert the PC Card.

3.Click OK to accept the PC Card configuration.

4.Follow the instructions for standard Windows NT 4.0 PC Card support above to add Network support.

4-15

Page 79
Image 79
HP BOOK 3000 manual Using Phoenix CardExecutive