HP BOOK 3000 manual To delete a password

Important

Introduction

Protecting the OmniBook

Be sure you record your password in a safe place. If you forget your password, you might need to return your OmniBook PC to Hewlett-Packard for repair. You will also need your proof-of-purchase. Call Hewlett-Packard at the number in the Support and Service booklet.

To delete a password

1.Reset the computer and press F2, when prompted, to enter the BIOS Setup Utility. Active keys are described along the bottom of the screen. (The TouchPad does not work in BIOS Setup.)

2.Select the Security menu.

3.Select Set System Password, then Press Enter.

4.Type the current password, then Press Enter.

5.Press Enter at the Enter New Password prompt.

6.Press Enter at the Confirm New Password prompt.

7.Press Continue to save changes.

8.Press F10 to save and exit BIOS Setup.

1-19