3.Press the button next to Fax Menu.

4.Press the button next to Fax Setup.

5.Press the button next to the down arrow to highlight Distinctive Ring, and then press the button next to OK.

6.Press the button next to the down arrow to highlight the appropriate option, and then press the button next to OK.

When the phone rings with the ring pattern assigned to your fax line, the product answers the call and receives the fax.

For more information, see:

“Choose the recommended answer setting for your setup” on page 19

Set up the HP All-in-One to check the paper type before printing faxes

By default, the HP All-in-One checks the paper type before printing a fax to ensure plain paper is loaded in the input tray. This prevents wasted paper and ink that might result from printing faxes on photo or transparency paper left in the input tray from a previous job.

If you have plain paper loaded and the HP All-in-One is erroneously detecting your paper as a type other than plain, you can change the Paper Checking setting, so this detection does not take place before printing faxes.

NOTE: The HP All-in-One always checks the paper size before printing faxes, regardless of the Paper Checking setting. This is to prevent ink from overprinting into the device if a full-size fax was printed on small-size paper.

To turn off paper checking from the control panel

1.Press the button next to Scan/Fax.

2.Press the button next to Fax Menu.

3.Press the button next to Fax Setup.

4.Press the button next to the down arrow to highlight Paper Checking, and then press the button next to OK.

5.Press the button next to the down arrow to highlight Off, and then press the button next to OK.

Set up backup fax reception

Depending on your preference and security requirements, you can set up the HP All-in- One to store the faxes it receives while the product is in an error condition or ignore the faxes it receives.

Finish setting up the HP All-in-One

Fax setup

21