Scan

Chapter 10

To scan to a computer

1.Load your original print side down on the right front corner of the glass.

NOTE: Ensure that there are no memory cards inserted in the memory card slots on the product.

2.Press the button next to Scan/Fax. The Scan/Fax menu appears.

3.Press the button next to Start Scan.

A preview image of the scan appears on your computer, where you can edit it. Any edits that you make apply to the current scan session only.

The HP Photosmart Software has many tools that you can use to edit your scanned image. You can improve the overall image quality by adjusting the brightness, sharpness, color tone, and saturation. You can also crop, straighten, rotate, or resize the image.

4.Make any edits to the preview image, and then click Accept when you are finished.

Related topics

•“The HP All-in-One at a glance” on page 5

•“Load originals” on page 27

Edit a scanned image

You can edit a scanned image, such as a photo or graphic, using the software you installed with the HP All-in-One. Using this software, you can rotate or crop the image, as well as adjust the brightness, contrast, and color saturation.

NOTE: If you are using the HP Photosmart Software, the Optical Character Recognition (OCR) software might not be installed on your computer. To install the OCR software, you must re-insert the software disk and select OCR under the Custom installation options.

Related topics

“Use the HP Photosmart Software” on page 10

76 Use the scan features