the Maintain

All HP in-

One-

Chapter 12

Remove ink from your skin and clothing

Follow these instructions to remove ink from your skin and clothing:

Surface

Remedy

 

 

 

 

 

Skin

Wash the area with an abrasive soap.

 

 

 

 

 

White fabric

Wash the fabric in cold water and use chlorine bleach.

 

 

 

 

 

Color fabric

Wash the fabric in cold water and use sudsy ammonia.

 

 

 

 

 

 

 

 

 

CAUTION: Always use cold water to remove ink from fabric. Warm or hot water can set the ink into the fabric.

Reduce energy consumption when the HP All-in-One is off

When the HP All-in-One is off, an amount of energy is still being consumed. Energy consumption can be lessened by enabling the Standby/Off state.

NOTE: When the HP All-in-One is in the Standby/Off state, it will take longer than usual to turn back on.

To enable the Standby/Off state

▲Press and hold the On button for 3 seconds until the HP All-in-One turns off.

Self-maintenance sounds

The HP All-in-One will make mechanical noises at various times to perform periodic maintenance functions, such as replenishing the ink levels in the print head assembly or cleaning the print head. This is normal operation and is necessary to ensure the HP All- in-One produces the best quality printouts.

CAUTION: A message on the display will notify you when the HP All-in-One is performing maintenance functions. Do not remove power from the device during this time.

Turn off the HP All-in-One

To avoid damaging the HP All-in-One, you must properly shut it down by using the On button located on the device. Do not turn the HP All-in-One off by unplugging the power cord or turning off a power strip.

106 Maintain the HP All-in-One