To load envelopes

1.Pull out the main input tray, and then slide the paper-width and paper-length guides to their outermost positions.

2.Remove all paper from the main input tray.

3.Insert one or more envelopes into the far-right side of the main input tray with the envelope flaps up and on the left. Slide the stack of envelopes forward until it stops.

4.Slide the paper-width guide inward against the stack of envelopes until it stops.

Do not overload the main input tray; make sure the stack of envelopes fits within the main input tray and is not higher than the top of the paper-width guide.

5.Push the main input tray back into the HP All-in-One.

6.Pull the output tray extender toward you, as far as it will go.

Load originals and load paper

NOTE: When you use legal-size paper, leave the tray extender closed.

Related topics

Change the print settings for the current job” on page 46

Load paper

41