•Network configuration page definitions
Change basic network settings from the control panelYou can perform a variety of network management tasks from the control panel, such as printing the network settings and restoring network defaults.
This section contains the following topics:
•View and print network settings
View and print network settingsYou can display a summary of the network settings on the HP
1.On the control panel of the HP
2.Press until Network is highlighted, and then press OK. The Network Menu appears.
3.Press until View Network Settings is highlighted, and then press OK. The View Network Settings Menu appears.
4.Do one of the following:
•To display wired network settings, press until Display Wired Summary is highlighted, and then press OK.
This displays a summary of the wired (Ethernet) network settings.
•To print the network configuration page, press until Print Network Configuration Page is highlighted, and then press OK.
This prints the network configuration page.
Related topics
“Network configuration page definitions” on page 26
Restore network defaultsYou can reset the network settings to what they were when you purchased the HP
1.On the control panel of the HP
2.Press until Network is highlighted, and then press OK.
3.Press until Restore Network Defaults is highlighted, and then press OK.
4.Press OK to confirm that you want to restore the network defaults.
Change advanced network settings from the control panel settingsThe advanced network settings are provided for your convenience. However, unless you are an advanced user, you should not change any of these settings.
Finish setup
Connect to a network | 23 |