The Mixed enhancement is the default option. Use the Mixed enhancement to sharpen edges of most originals. You can use Photo enhancements to enhance light colors that might otherwise appear white.
If any of the following occur, turn off Text enhancement by selecting Photo or None:
•Stray dots of color surround some text on your copies
•Large, black typefaces look splotchy (not smooth)
•Thin, colored objects or lines contain black sections
•Horizontal grainy or white bands appear in light- to
1.Make sure you have paper loaded in the input tray.
2.Load your original print side down on the right front corner of the glass.
3.Press Copy Menu.
The Copy Menu appears.
4.Press 
to highlight Enhancements, and then press OK. The Enhancements menu appears.
5.Press 
to highlight Text, and then press OK.
6.Press Start Copy Black or Start Copy Color.
1.Make sure you have paper loaded in the input tray.
2.Position the photo on the glass so the long edge of the photo is along the front edge of the glass.
Load your original print side down on the right front corner of the glass.
3.Press Copy Menu.
The Copy Menu appears.
4.Press 
to highlight Enhancements, and then press OK. The Enhancements menu appears.
5.Press 
to highlight Photo, and then press OK.
6.Press Start Copy Black or Start Copy Color.
Stop copying
To stop copying▲Press Cancel on the control panel.
Copy
Stop copying | 93 |