To scan to a computer

1.Load your original print side down on the right front corner of the glass.

2.Press Scan Menu on the control panel.

3.Press to highlight Scan to Computer, and then press OK.

4.If the HP All-in-One is connected to one or more computers on a network, do the following:

a. Press OK to select Select Computer.

A list of the computers connected to the HP All-in-One appears on the display.

NOTE: The Select Computer menu might list computers with a USB connection in addition to those connected through the network.

b. Press OK to select the default computer, or press to select a different computer, and then press OK.

The Scan To menu appears on the display, listing the applications on the selected computer.

If the HP All-in-One is connected directly to a computer with a USB cable, proceed to step 5.

5.Press OK to select the default application to receive the scan, or press to select a different application, and then press OK.

NOTE: Alternatively, you can press Start Scan instead of OK.

A preview image of the scan appears on your computer, where you can edit it.

6.Make any edits to the preview image, and then click Accept when you are finished.

Related topics

•“Control panel features” on page 7

•“Scan Menu” on page 10

Scan

Scan an original to a memory card

You can send the scanned image as a JPEG image to the memory card that is currently inserted. This enables you to use the photo print options to print borderless prints and album pages from the scanned image.

NOTE: If the HP All-in-One is connected to a network, you can access the scanned image only if the memory card is being shared across the network.

To save a scan to a memory card

1.Make sure your memory card is inserted into the appropriate slot on the HP All-in- One.

2.Load your original print side down on the right front corner of the glass.

Scan an image

81