Copy

Make a borderless copy of a photo

For the best quality when copying a photo, load 10 x 15 cm (4 x 6 inch) photo paper in the photo tray and change your copy settings for the correct paper type and photo enhancement.

To make a borderless copy of a photo from the control panel

1.Load up to 10 x 15 cm (4 x 6 inch) photo paper into the photo tray.

2.Load your original photo print side down on the right front corner of the glass. Position the photo on the glass so the long edge of the photo is along the front edge of the glass, as indicated by the engraved guides along the edge of the glass.

3.Press Start Copy Black or Start Copy Color.

The HP All-in-One makes a borderless copy of your original photo.

NOTE: If you loaded tabbed paper in the photo tray, you can remove the tab from the copy of your photo once the ink has completely dried.

TIP: If the output is not borderless set the paper type to Premium Photo, and then try making the copy again.

Related topics

Load 10 x 15 cm (4 x 6 inch) photo paper” on page 38

Set the copy paper type” on page 87

90 Use the copy features