6.Press to highlight one of the following IP settings, and then press OK.
•IP Address•Subnet Mask•Default Gateway7.Enter your changes, and then press OK to confirm the setting.
Related topics
•“View and print network settings” on page 23
•“Network configuration page definitions” on page 26
Use the Embedded Web ServerIf your computer is connected to an HP
a
NOTE: Use the Embedded Web Server to change network settings not available on the control panel.
This section contains the following topics:
Finish setup
The computer you use to access the Embedded Web Server on the HP
1.Print a network configuration page to find the IP address for the HP
2.In the Address box in your Web browser on your computer, type the IP address of the HP
The Embedded Web Server Information page appears, showing information for the HP
NOTE: If you are using a proxy server in your browser, you might need to disable it to access the Embedded Web Server.
3.If you need to change the language displayed in the Embedded Web Server, do the following:
a. Click the Information tab.
b. Click Language in the navigation menu.
c. In the Language list, click the appropriate language. d. Click Apply.
Connect to a network | 25 |