Wake Time
An IT administrator can use the Wake Time screen to schedule product wakeups on a daily basis. For example, the product can be set to wake up at 07:30, so the product has finished initializing and calibrating and is ready to use by 08:00. The administrator sets only one wakeup setting per day; however, each day can have a different wakeup setting. Additionally, to save energy, the sleep delay can be set to turn the product off after a specific period of inactivity.
Settings
Figure 3-20 Wake Time screen
Table 3-13 Wake Time
Callout | Area on the screen | Information or capability that the area provides |
|
|
|
1 | HP EWS tabs and menus | For more information, see Navigating through the HP Embedded Web Server. |
|
|
|
2 | Wake Time | Select one or more days on which to use the wakeup setting, and then set the time |
|
| the product is turned on each day. |
|
|
|
3 | Sleep Delay | Set the amount of time the product is idle before it goes into Sleep Mode. When the |
|
| product is in Sleep Mode, it uses less energy. |
|
|
|
ENWW | Wake Time 63 |
