HP CM4730 manual 5Send to Fax

Table 4-5Send to Fax (continued)

Callout	Area on the screen	Information or capability that the area provides
3	Send Faxes	directly from the device's	Send faxes directly from the device. When this
		internal modem	option is selected, you must select or type the
			following information:
			●	The country/region
			●	The company name
			● The phone number to which the internal
				modem of the device is connected
			● If applicable, any prefix number that your
				phone system requires
		via the Digital Sending	Send faxes by using the digital sending software
		service	service.
4	Device Modem Settings	Type these settings if directly from the MFP's internal modem is selected from
		the Send Faxes list.
5	Advanced	Click this button to open a new screen where you can set advanced product modem
		settings, such as modem and ringer volume, and send and receive settings. From
		this screen, you can also print a fax activity log and gain access to security and
		diagnostics settings. For more information, see Advanced Fax Settings .
6	Notification	Set the notification options, such as whether a fax success or failure notification will
		be sent, whether the notification will be printed, or whether the sender should
		receive a notification report. Select the Include Thumbnail Image check box to
		include a scaled-down image of the scanned document in the notification report.
7	Quality	Select the resolution for the outgoing faxes.
8	Billing Code	Type the billing code, if applicable. If you want to, you can select the Editable by
		User check box to allow the user to change the code. Use the Minimum Length
		field to set the minimum length of the billing code. The billing code can be a value
		between 1 and 16.

Digital Sending

ENWW Fax Settings 79