Appendix D
(continued)
Item | Limit |
|
|
NOTE: The predefined All Services template |
|
is not subject to this limitation and includes all |
|
services supported by the print server. |
|
|
|
Maximum number of services you can add to | 40 |
the policy. |
|
For a given rule, only one address template |
|
and one service template can be added. |
|
|
|
Maximum number of service templates in the | 10 |
policy. |
|
|
|
Maximum number of | 5 |
service templates. |
|
|
|
Reset network settings
To reset the administrator password and network settings, touch 
(right arrow), touch Network, touch Restore Network Defaults, and then select Yes. A message appears stating that the network defaults have been restored.
NOTE: Print the network configuration page and verify that the network settings have been reset. For more information, see Understand the network configuration page.
NOTE: Resetting the printer’s network settings also resets the printer’s firewall settings. For more information about configuring the printer’s firewall settings, see Configure the printer’s firewall settings.
Set up the printer for wireless communication
You can set up the printer for wireless communication.
This section contains the following topics:
•Set up the printer on your wireless network
•Guidelines for ensuring wireless network security
•Guidelines for reducing interference on a wireless network
NOTE: If you encounter problems connecting the printer, see Solve wireless problems.
TIP: For more information about setting up and using the printer wirelessly, visit the HP Wireless Printing Center (www.hp.com/go/wirelessprinting).
Before you begin
Before you begin setting up the wireless connection, check the following:
•The printer is not connected to the network using a network cable.
•The wireless network is set up and functioning correctly.
•The printer and the computers that use the printer are on the same network (subnet).
222 Network setup