NOTE: Sheets of width 329 mm (12.95 in) or less should be loaded from the
1.At the front panel, press 
, then Load single sheet.
2.If a roll is already loaded, you have to wait while it is automatically unloaded.
3.Select your paper category and type. If you do not see your paper type in the front panel, press More paper types. If you still cannot find your paper type in the whole list, see The paper type is not in the driver on page 98.
4.If your printer is a T520, open the roll cover.
5.When prompted by the front panel, insert the sheet into the
WARNING! Do not push your fingers inside the printer's paper path.
6.Align the sheet with the blue line.
ENWW | Load a single sheet 37 |
