Replace the printhead

TIP: When the printhead has been replaced, the printer will automatically perform a printhead alignment on the loaded paper. If you would like to perform the printhead alignment on a different paper (perhaps from the multi-sheet tray), you could change the paper before starting this procedure. Plain white paper is recommended.

1.Make sure the printer is turned on.

2.If your printer is on a stand, make sure the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving.

3.From the front panel, press , then Image quality maintenance > Replace printhead.

4.Open the ink cartridge cover.

5.Wait until the carriage stops moving.

6.Press each ink cartridge to unlock it.

82 Chapter 10 Maintaining the printer

ENWW

Page 90
Image 90
HP CQ893AB1K manual Replace the printhead