3.Adjust the output tray extensions depending on the length of the paper.

4.Load sheets of paper into the tray with the printed side facing outwards. Ensure that the sheets are all of the same size.

5.Adjust the tray to fit the width of the paper.

View information about the paper

To view the loaded paper information, press the icon of the active paper source.

The following information is displayed on the front panel:

Paper type you have selected

Roll or sheet status

Width of the paper in millimeters (estimated)

ENWW

View information about the paper 39

Page 47
Image 47
HP CQ893AB1K manual View information about the paper