Removal and Replacement Procedures— Small Form Factor (SFF) Chassis

To install a PCI expansion card:

1.Place the card under the rear panel bracket 1, then firmly push the expansion card into the connector 2. Ensure that the card is firmly seated in the expansion card slot.

✎Be sure not to touch the rear panel bracket or other components in the chassis when installing an expansion card.

2.Push the expansion slot latch down 3 to secure the card.

If you are not replacing the old expansion card with a new card, install an expansion slot cover to close the open slot. Insert the metal slot covering the open slot, then push the expansion slot latch down to secure the slot cover in place.

ÄCAUTION: After removing an expansion card, you must replace it with a new card or cover the open slot (for example, with a metal slot cover or a piece of cardboard taped in place) for proper cooling of internal components. Failure to do so may cause the system to overheat.

7–10

360201-002

Service Reference Guide, dc5000