POST Error Messages

 

POST Error Messages

 

 

 

 

 

 

 

 

Screen Message

Probable Cause

Recommended Action

 

 

 

 

 

 

 

214-DIMM

Populated DIMM

2 DIMMS - For maximum performance,

 

Configuration Warning

Configuration is

place both DIMMs in the two BLACK

 

 

unbalanced.

DIMM slots.

 

 

 

4 DIMMS - For maximum performance,

 

 

 

swap one DIMM in a BLUE slot with one

 

 

 

in a BLACK slot.

 

 

 

 

 

 

301-Keyboard Error

Keyboard failure.

Reconnect keyboard with computer

 

 

 

turned off.

 

 

 

Check connector for bent or missing

 

 

 

pins.

 

 

 

Ensure that none of the keys are

 

 

 

depressed.

 

 

 

Replace keyboard.

 

 

 

 

 

 

303-Keyboard

I/O board keyboard

Reconnect keyboard with computer

 

Controller Error

controller.

turned off.

 

 

 

Replace the system board.

 

 

 

 

 

 

304-Keyboard or

Keyboard failure.

Reconnect the keyboard with computer

 

System Unit Error

 

turned off.

 

 

 

Ensure that none of the keys are

 

 

 

depressed.

 

 

 

Replace keyboard.

 

 

 

Replace system board.

 

 

 

 

 

 

401-Parallel Port 1

IRQ address conflicts with

Reset the IRQ.

 

Address Assignment

another device.

 

 

 

Conflict

 

 

 

 

 

 

 

 

 

402-Parallel Port 2

IRQ address conflicts with

Reset the IRQ.

 

Address Assignment

another device.

 

 

 

Conflict

 

 

 

 

 

 

 

 

 

403-Parallel Port 3

IRQ address conflicts with

Reset the IRQ.

 

Address Assignment

another device.

 

 

 

Conflict

 

 

 

404-Parallel Port

Both external and internal

Address Conflict

ports are assigned to

Detected

parallel port X.

Remove any parallel expansion cards. Clear CMOS.

Reconfigure card resources and/or run Computer Setup (F10 Setup).

410-Audio Interrupt

IRQ address conflicts with

Reset the IRQ.

Conflict

another device.

 

 

 

 

411-Network Interface

IRQ address conflicts with

Reset the IRQ.

Card Interrupt Conflict

another device.

 

 

 

 

417-Network Interface

Failure to read MAC

Unplug AC power cord, wait 5 seconds,

card Failure

address information from

then reboot unit.

 

NIC.

 

 

 

 

Service Reference Guide, dc5000

360201-002

C–3