Removal and Replacement Procedures— Small Form Factor (SFF) Chassis

7.10Power Switch Assembly

1.Prepare the computer for disassembly (Section 7.1, “Preparation for Disassembly”).

2.Disconnect the power switch/LED cable from the system board.

3.Carefully cut the cable tie that secures the power switch cable to the power supply cable cable bundle.

ÄCAUTION: Be careful when cutting the cable tie not to cut any cables.

4.Squeeze the switch holder retaining clips together at the front of the chassis 1 and push the switch assembly out of the chassis 2.

To install the power switch assembly, reverse the removal procedure.

Service Reference Guide, dc5000

360201-002

7–21