HP DC5000 F10, F10, F12, F12, Option, Heading, Storage, F10=Setup, Boot Order, Description, F9=Boot Menu, F12=Network Service Boot

		Setup Utilities and Diagnostics Features
Heading	Option	Description
Advanced**	Power-On Options	Allows you to set:
		POST mode (QuickBoot, FullBoot, or FullBoot every 1-30 days).
		POST messages (enable/disable).
		F9 prompt (enable/disable). Enabling this feature will display
		the text F9=Boot Menu during POST. Disabling this feature
		prevents the text from being displayed but pressing F9 will still
		access the Shortcut Boot (Order) Menu screen. See Storage >
		Boot Order for more information.
		F10 prompt (enable/disable). Enabling this feature will
		display the text F10=Setup during POST. Disabling this
		feature prevents the text from being displayed but pressing
		F10 will still access the Setup screen.
		F12 prompt (enable/disable). Enabling this feature will
		display the text F12=Network Service Boot during POST.
		Disabling this feature prevents the text from being displayed
		but pressing F12 will still force the system to attempt booting
		from the network.
		Option ROM* prompt (enable/disable). Enabling this feature
		will cause the system to display a message before loading
		options ROMs.
		Fan idle mode* allows you to set the idle speed to 1 (default),
		2, 3, or 4 (fastest). Higher speeds will provide more cooling
		during idle, but will be louder.
		Remote wakeup boot source (remote server/local hard drive).
		After Power Loss (off/on): After power loss, if you connect your
		computer to an electric power strip and would like to turn on
		power to the computer using the switch on the power strip, set
		this option to ON.
		✎ If you turn off power to your computer using the switch on a
		power strip, you will not be able to use the suspend/sleep
		feature or the Remote Management features.

* Available on select models.

**These options should be used by advanced users only.

Service Reference Guide, dc5000 360201-002 2–9