Removal and Replacement Procedures— Small Form Factor (SFF) Chassis

7.3Computer Access Panel

1.Prepare the computer for disassembly (Section 7.1, “Preparation for Disassembly”).

ÄCAUTION: Before removing the computer access panel, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet.

2.Pull up and hold open the latch on the top of the computer 1.

3.Slide the computer access panel 2 back about 0.5inch (1.3 cm), then lift it off the unit.

When installing the access panel, press down on its center to ensure the latches are properly secured while sliding it into the locked position.

7–4

360201-002

Service Reference Guide, dc5000